Alex Je Bailey

Smelly Washers

Removal of soap and water from the clothing after washing was originally a separate process. The soaking wet clothing would be formed into a roll and twisted by hand to extract water. To help reduce this labour, the wringer/mangle was developed, which uses two rollers under spring tension to squeeze water out of the clothing. Each piece of clothing would be fed through the wringer separately. The first wringers were hand-operated, but were eventually included as a powered attachment above the washer tub. The wringer would be swung over the wash tub so that extracted wash water would fall back into the tub to be reused for the next wash load.

The modern process of water removal by spinning did not come into use until electric motors were developed. Spinning requires a constant high-speed power source, and was originally done in a separate device known as an extractor. A load of washed clothing would be transferred from the wash tub to the extractor basket, and the water spun out. These early extractors were often dangerous to use since unevenly distributed loads would cause the machine to shake violently. Many efforts have been made to counteract the shaking of unstable loads, first by mounting the spinning basket on a free-floating shock-absorbing frame to absorb minor imbalances, and a bump switch to detect severe movement and stop the machine so that the load can be manually redistributed. Many modern machines are equipped with a sealed ring of liquid that works to counteract any imbalances.